Finishing set for a single electronic switch or push button, cream
Description
Finishing set for a single electronic switch or push button. Finishing colour: cream.
Specification description
Finishing set for a single electronic switch or push button, cream.
- Function: The key and the intermediate plate (board) form one unit.
- Number of control buttons: 1 control button
- Material central plate: The central plate is made of rigid PC and ASA. The base material is mass-dyed.
- Colour: cream (mass-dyed, approximately NCS S 1005 - Y10R, RAL 1013)
- Dismantling: To dismount simply pull the central plate off the mechanism.
- Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
- Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact resistance of IK02
- Fire safety
- the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
- the plastic parts of the central plate are halogen-free
- Dimensions of finishing: 45 x 45 mm (HxW)
- Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
- Marking: CE
Related products:
Wireless battery-powered switch, onefold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The single key and faceplate must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, claw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with claw fixing. The base includes a safety protection cover. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, screw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with screw fixing. The base includes a safety protection cover. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, claw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with claw fixing. The base includes a safety protection cover. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, screw fixing
Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with screw fixing. The base includes a safety protection cover. This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Wireless battery-powered switch, onefold, Zigbee®, excluding base
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch must be mounted on a metal base (552-720X0), making it possible to install the switch on a flush-mounting box. If you want to install the onefold wireless battery-powered Zigbee® on a flat wall, order the variant with a plastic base instead (552-72001). The single key, faceplate and metal base must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Finishing set for a single electronic switch or push button, white
Finishing set for a single electronic switch or push button. Finishing colour: white.
