! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Wireless battery-powered switch, 1-fold, Zigbee®

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Product details

This product consists of several components. Below you will find an overview of all the component parts.

Wireless battery-powered switch, onefold, Zigbee®

Reference code
552-72001

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The single key and faceplate must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Specification description

Wireless battery-powered switch, onefold, Zigbee®.

  • Maximum range (from switch to smart hub): 10 m
  • Power supply: via battery 3 V DC, CR2450
  • Battery lifespan: 5 years at 20 actuations/day
  • Antenna: integrated antenna
  • Humidity: 0 – 95 % relative humidity, non-condensing
  • Maximum per installation:
    • max. 50 connected Zigbee® devices per Niko Home Control installation
    • stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
  • Ambient temperature operation: 5 °C – 30 °C
  • Ambient temperature storage: 0 °C – 40 °C
  • Compatible with the wireless bridge
  • Number of control buttons: 1 control button
  • Communication protocol: Zigbee® 3.0
  • Maximum radio frequency power: 8 dBm
  • Operating frequency: 2.4 GHz
  • System compatibility: talks with Homey (Zigbee®)
  • Protection degree: IP20
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Fixing method

screw fixing or gluing

  • Dimensions (HxWxD): 71 x 71 x 10 mm
  • Weight: 23 g
  • Certification marks: Zigbee Certified Product
  • Marking: CE

Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, claw fixing

Reference code
552-72000

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with claw fixing. The base includes a safety protection cover.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Metal base for wireless battery-powered Zigbee® switch, 60 x 71 mm, screw fixing

Reference code
552-72020

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 60 x 71 mm, with screw fixing. The base includes a safety protection cover.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, claw fixing

Reference code
552-72030

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with claw fixing. The base includes a safety protection cover.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Metal base for wireless battery-powered Zigbee® switch, 71 x 71 mm, screw fixing

Reference code
552-72010

Metal base for mounting a wireless battery-powered Zigbee® switch (552-7201X) in a flush-mounting box, 71 x 71 mm, with screw fixing. The base includes a safety protection cover.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Wireless battery-powered switch, onefold, Zigbee®, excluding base

Reference code
552-72011

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch must be mounted on a metal base (552-720X0), making it possible to install the switch on a flush-mounting box. If you want to install the onefold wireless battery-powered Zigbee® on a flat wall, order the variant with a plastic base instead (552-72001). The single key, faceplate and metal base must be ordered separately. This onefold wireless battery-powered Zigbee® switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice. For best performance, follow the installation and radio planning guidelines. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Specification description

Wireless battery-powered switch, onefold, Zigbee®, excluding base.

  • Mounting method: flush-mounting box
  • Maximum range (from switch to smart hub): 10 m
  • Power supply: via battery 3 V DC, CR2450
  • Battery lifespan: 5 years at 20 actuations/day
  • Antenna: integrated antenna
  • Humidity: 0 – 95 % relative humidity, non-condensing
  • Maximum per installation:
    • max. 50 connected Zigbee® devices per Niko Home Control installation
    • stand-alone: max. 8 Zigbee® receivers (ON/OFF/dimming) per switch
  • Ambient temperature operation: 5 °C – 30 °C
  • Ambient temperature storage: 0 °C – 40 °C
  • Compatible with the wireless bridge
  • Number of control buttons: 1 control button
  • Communication protocol: Zigbee® 3.0
  • Maximum radio frequency power: 8 dBm
  • Operating frequency: 2.4 GHz
  • System compatibility: talks with Homey (Zigbee®)
  • Protection degree: IP20
  • Required type of flush-mounting box
    • depth: min. 40 mm (cabling space included)
    • claw/screw fixing: 60 mm
    • inner diameter box: 60 mm
    • multiple boxes centre distance horizontal: 71 mm
    • multiple boxes centre distance vertical: 71 mm
    • multiple boxes centre distance vertical: 60 mm for Belgium and France
  • Dimensions (HxWxD): 45 x 46 x 9 mm
  • Weight: 17 g
  • Certification marks: Zigbee Certified Product
  • Marking: CE

Finishing set for a single electronic switch or push button, cream

Reference code
100-31002

Finishing set for a single electronic switch or push button. Finishing colour: cream.

  • 100-31002
    Colour cream
    Reference code 100-31002
  • 101-31002
    Colour white
    Reference code 101-31002
  • 102-31002
    Colour light grey
    Reference code 102-31002
  • 121-31002
    Colour sterling coated
    Reference code 121-31002
  • 122-31002
    Colour anthracite coated
    Reference code 122-31002
  • 123-31002
    Colour bronze coated
    Reference code 123-31002
  • 124-31002
    Colour dark brown coated
    Reference code 124-31002
  • 154-31002
    Colour white coated
    Reference code 154-31002
  • 157-31002
    Colour champagne coated
    Reference code 157-31002
  • 161-31002
    Colour black coated
    Reference code 161-31002
  • 200-31002
    Colour piano black coated
    Reference code 200-31002
  • 220-31002
    Colour blue grey coated
    Reference code 220-31002
  • 221-31002
    Colour gold coated
    Reference code 221-31002

Related products

Wireless battery-powered switch, 2-fold, Zigbee®

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72002) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless battery-powered switch, 4-fold, Zigbee®

This fourfold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72004) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the fourfold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72014). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Niko dimmer switch, KNX®

This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).

Favorites ( 0 )