Smart universal push-button dimmer with RF transmitter and receiver, 3 – 200 W, 2-wire
The smart dimmer is suitable for dimming resistive, inductive and capacitive loads as well as dimming dimmable halogen and LED lamps. It has a transmitter and receiver operating according to the Easywave protocol.
If desired, extra controls can be added. These could be both wired push buttons and wireless controls according to the Easywave protocol.
The smart dimmer is connected with a 2-wire system and does not need a neutral conductor. By doing so, it can effortlessly replace an existing single, multiway, or intermediate switching.
It is highly suitable for the expansion of existing electrical installations where drilling or channelling work is not permitted or to avoid complicated cabling.
The smart dimmer can not only dim its own load but can also control other dim receivers which operate according to the Easywave protocol. It can also be incorporated in a scene setting which can be activated via a wireless control.
The dimmer has a feedback LED of which the operation can be set.
Product details
Smart universal push-button dimmer with RF transmitter and receiver, 3 – 200 W, 2-wire, with claw fixing
The smart dimmer is suitable for dimming resistive, inductive and capacitive loads as well as dimming dimmable halogen and LED lamps. It has a transmitter and receiver operating according to the Easywave protocol.
If desired, extra controls can be added. These could be both wired push buttons and wireless controls according to the Easywave protocol.
The smart dimmer is connected with a 2-wire system and does not need a neutral conductor. By doing so, it can effortlessly replace an existing single, multiway, or intermediate switching.
It is highly suitable for the expansion of existing electrical installations where drilling or channelling work is not permitted or to avoid complicated cabling.
The smart dimmer can not only dim its own load but can also control other dim receivers which
operate according to the Easywave protocol. It can also be incorporated in a mood setting which can be activated via a wireless control.
The dimmer has a feedback LED of which the operation can be set.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Smart universal push-button dimmer with RF transmitter and receiver, 3 – 200 W, 2-wire, with screw fixing
The smart dimmer is suitable for dimming resistive, inductive and capacitive loads as well as dimming dimmable halogen and LED lamps. It has a transmitter and receiver operating according to the Easywave protocol.
If desired, extra controls can be added. These could be both wired push buttons and wireless controls according to the Easywave protocol.
The smart dimmer is connected with a 2-wire system and does not need a neutral conductor. By doing so, it can effortlessly replace an existing single, multiway, or intermediate switching.
It is highly suitable for the expansion of existing electrical installations where drilling or channelling work is not permitted or to avoid complicated cabling.
The smart dimmer can not only dim its own load but can also control other dim receivers which
operate according to the Easywave protocol. It can also be incorporated in a mood setting which can be activated via a wireless control.
The dimmer has a feedback LED of which the operation can be set.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Finishing set with lens for a single electronic switch or push button, cream
Finishing set with lens for a single electronic switch or push button. Finishing colour: cream.
Finishing set for a single electronic switch or push button, cream
Finishing set for a single electronic switch or push button. Finishing colour: cream.
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Niko dimmer switch, KNX®
This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).
Niko dimmer switch, EnOcean®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).
