Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting, white

This 1-channel outdoor motion detector is especially suitable for use in a driveway or garden. It was designed to be surface mounted on a wall or partition. The detection range can be set to between 0 and 16 m and can be adapted using the cover mask. The sensor is surface-mounted on the wall. The device has a built-in light sensor and switches the lighting on and off automatically. Manual operation is also possible using the N.C. push button (to be ordered separately). After the pre-set time delay, the light is switched off automatically. This motion detector has an IP54 protection degree and complies with the European directives for EMC and safety, EN 60669-2-1.

Finishing colour: white

Motion detector, 230 V, 16 m, 180°, IP54, for surface mounting, white.

• Detector technology: PIR
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Detector output: 230 V (ON/OFF)
• Maximum MCB rating: 10 A (limited by national installation rules)
• Number of channels: 1 channel
• Light intensity range: 5 lux – ∞
• Switch-off delay: test, 1 min – 30 min
• Detection angle: 180°
• Detection range (PIR): 16 m from a height of 3 m
• Ambient temperature: -20 – +45 °C
• Mounting method: surface mounting
• Mounting height: 2 – 3 m
• Usage: for outdoor use
• Relay contact: N.O. (max. 10 A)
• Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
• Maximum load low voltage halogen lamps: 1200 W
• Maximum load economy lamps (CFLi): 350 W
• Maximum load LED lamps 230 V: 350 W
• Maximum capacitive load: 140 µF
• Maximum switching current: 165 A/20 ms – 800 A/200 µs
• Dimensions (HxWxD): 125 x 72 x 63 mm
• Protection degree: IP54
• Protection class: Class II device
• Marking: CE