From Niko Home Control version 2.17, you can manage the full activation and associated configuration via the Niko Home Control programming software. ​This software can be downloaded from the Niko website.

From Niko Home Control version 2.17, you can activate your partner system via the Niko Home Control programming software. This software can be downloaded from the Niko website.

Your installation uses bus wiring or traditional wiring. You do not need to do anything to connect your Niko Home Control installation to the partner's energy system.

Only applicable for Niko Home Control II installations with a software version 2.16 or older. If no basic actions or routines had been created in the Niko Home Control programming software to control a partner function, then this list will indeed be empty (but this is by no means a problem). The partner system's functions are always visible in the Niko Home app and on the touchscreen, even if you have not configured anything in the Niko Home Control programming software.

The following Smappee products are compatible with Niko Home Control version 2.5.1 until 2.15 included: From version 2.16, Smappee devices are no longer compatible with Niko Home Control. Smappee Energy Smappee Solar Smappee Pro Smappee Plus

Niko Home Control is compatible with both Sonos S1 and S2 product versions.

Bose speakers that are SoundTouch-compatible (e.g. SoundTouch 10, 20 or 30) can be connected to Niko Home Control. The Bose "Smart home" series of products do not have an API to enable connection to Niko Home Control.

The Daikin system does not allow any adjustments to be made (e.g. temperature setting) when the holiday mode is active. Consequently, Niko Home Control actions will also be ignored by the Daikin system as long as this holiday mode is active in the Daikin system.

Niko collaborates with high-quality partners who prioritise Niko's core values, such as high quality, design and reliability.

You should see the Daikin functions in: The Home location when using the Niko Home App. The functions tab when using the Niko Home Control App. ​You can find a number of suggestions for discovering the problem below:

The connected controller for Niko Home Control II or the wireless smart hub makes a connection with the partner system. Depending on the partner system's features, this will either take place locally in the home (local API connection) or via the Internet (cloud API).

You will need some extra Niko Home Control modules. Your installation uses bus wiring...

Your installation uses bus wiring or traditional wiring. You can connect your Niko Home Control to the partner's music system using an API. To do so, the device must be connected to your home network.

Your installation uses bus wiring or traditional wiring. You can connect your Niko Home Control to the partner's ventilation system using an API. To do so, the device must be connected to your home network.

Your installation uses bus wiring or traditional wiring. You can connect your Niko Home Control to the partner's heating system using an API. To do so, the thermostat must be connected to your home network. Niko Home Control will then communicate with your heating system via this API.

Make sure the partner system is connected to your home network, and if necessary to the Internet too (depending upon the partner). Your Niko Home Control system will also need an active Internet connection.

This will depend on the capabilities of the partner system. You can find more information on this on the applicable partner's website. ​Valve control is supported in Niko Home Control installations with bus wiring.

This will depend on the capabilities of the partner system. You can find more information on this on the applicable partner's website. Valve control is supported in Niko Home Control installations with bus wiring.

The best way to control the boiler is through the partner's thermostat.

The boiler is controlled through the partner's thermostat. It is not possible to combine thermostats from Niko and thermostats from the partner.

Niko Home Control and the partner system operate independently of each other. The API connection between Niko Home Control and the partner system allows you to control the functions of the partner system. If the link between both systems is lost, you can still control your own Niko Home Control functions. The functions of the partner system, however, can then only be controlled using the partner's app.