! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Ventilation control with LED for Niko Home Control, cream

Reference code
100-52054
Technical datasheets
Certificaten CE-Marking

Description

This push button allows four ventilation positions to be set. It is attached to the wall-mounted printed circuit using a click mechanism. An LED indicates to which level the ventilation is set. Switch including button. Finishing colour: cream.

Specification description

Ventilation control with LED for Niko Home Control, cream.

  • Material central plate: The central plate is made of rigid PC and ASA. The base material is coloured in mass.
  • Print: On the key in the bottom right corner a clock is printed to indicate the boost function. The three other keys are printed with a ventilator with the speed going anti-clockwise, starting with the key in the top left corner.
  • Lens: The upper and lower keys are fitted at the bottom with a small amber-coloured indication LED (1.5 x 1.5 mm) to indicate the status of the action. Using the programming software, you can program the LEDs to light up when the output is either activated or deactivated .
  • Colour: cream (mass-dyed, approximately NCS S 1005 - Y10R, RAL 1013)
  • Fire safety
    • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
    • the plastic parts of the central plate are halogen-free
  • Input voltage: 26 Vdc (SELV, safety extra-low voltage)
  • Dismantling: To dismount simply pull the central plate off the base.
  • Impact resistance: After mounting, an impact-resistance of IK06 is guaranteed.
  • Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )