Ventilation control with LEDs
The push button includes four action buttons: one for each setting of the central ventilation system (low, normal and high) and a boost mode button that activates the highest setting during a preset amount of time before returning to the previous setting. Each action button is equipped with an amber indication LED to indicate the status of the control. You mount the push button to the wall-mounted printed circuit board via a click mechanism.
Product details
Ventilation control with LED for Niko Home Control, cream
This push button allows four ventilation positions to be set. It is attached to the wall-mounted printed circuit using a click mechanism. An LED indicates to which level the ventilation is set. Switch including button. Finishing colour: cream.
Related products
Single faceplate
Simple wall-mounted printed circuit board with connector
The wall-mounted printed circuit board enables you to connect a control to the installation. You mount the wall-mounted printed circuit board with double plug-in connector onto a simple standard flush-mounting box with screw connection. A set of claws is to be ordered separately for flush-mounting boxes without screw connection.
Connected controller for Niko Home Control II
The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.
