LED dimmer receiver of the RF system, io-homecontrol®

This LED dimmer receiver is designed for the control and dimming of LEDs and is part of the wireless system io-homecontrol®. Transmission of the signals occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers. The LED receiver is suitable for supplying power to 10 monochrome Niko LED strips. The total connected load can max. 25W. This dimmer receiver is easy to install in small spaces thanks to its compact dimensions. The power supply is protected against overloading, overheating and short circuiting. User manual included.

LED dimmer receiver of the RF system, io-homecontrol®

This Niko LED receiver (LED-dimmer receiver) is designed for the control and dimming of LEDs and is part of the RF (Radio Frequency) system, io-homecontrol®, a wireless installation technique between the control points (switches) and the receivers to be operated. Transmission occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. As a result, the commands sent will always arrive securely at the receiver and vice versa. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers. The LED receiver is suitable for supplying power to 10 monochrome Niko LED strips. The 24V output voltage is stable, has a narrow tolerance and a high efficiency. The total connected load can be a maximum of 25W.

Thanks to Niko's click system, the strain relief is protected. In addition, this power supply has 2 secondary outputs in order to easily connect 2 loads and 2 primary inputs to allow interconnecting. Screw terminals are used on both the primary and the secondary sides. This dimmer receiver is easy to install in small spaces thanks to its compact dimensions. The device complies with the EN61347-2-13 safety standard, the EMC standards, EN61547, EN55015, EN61000-3-2 and EN61000-3-3, and the EN62384 performance standard. The power supplies are protected against overloading, overheating and short circuiting. The user manual is included.

• Märkning: CE