Step 2
Connect the digital meter to the wireless smart hub
A
Connect the supplied P1 cable to the P1 port of your digital meter.
B
Connect the other end of the P1 cable to the wireless smart hub.
C
Check whether the P1 port is active on the digital meter's display. This is the case if an arrow appears above GP. Ask your grid operator to activate the port if necessary. In Flanders (Fluvius) en Wallonia (Ores), a request for activation will always be required.
Note: It can take up to 72 hours for the port to be activated. In the meantime, you can proceed with the next steps.
