Wireless repeater
The repeater is used in installations with insufficient range and has two operating modes: cascade and defined mode.
When using up to three repeaters in cascade mode, the range can be extended by up to three times.
In defined mode, a maximum of 32 control points can be learned.
An indication LED flashes when a command is received or sent.
The repeater does not work for motor control and dimmers (because you have to press and hold the button for a long time).
Product details
Repeater for use in RF installations with insufficient range
The repeater is used in installations with insufficient range and has two operating modes: cascade and defined mode.
When using up to three repeaters in cascade mode, the range can be extended by up to 3 times.
In defined mode, a maximum of 32 control points can be learned.
An indication LED flashes when a command is received or sent.
The repeater does not work for motor control and dimmers (because you have to press and hold the button for a long time).
Technical specifications:
- dimensions (without antenna) (WxHxD): 48 x 48 x 25 mm
- input voltage: 230 V~
Specification description
Repeater for use in RF installations with insufficient range
- Not compatible with the wireless bridge, nor with the wireless smart hub
- Communication protocol: Easywave
- Operating frequency: 0.8683 GHz
- Weight: 40 g
- Dimensions (HxWxD): 25 x 48 x 48 mm
- Marking: CE
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Niko dimmer switch, KNX®
This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).
Niko dimmer switch, EnOcean®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).
