Wireless 2-channel receiver, 12 – 24 Vac or Vdc, for surface mounting
The two-channel receiver for surface mounting has four operating modes. Wireless transmitters can be connected to this receiver. An external pulse push button can also be connected per channel. The receiver can only be used for switching low-voltage loads. Possible applications: two-button control (on/off functions), push-button functions (on for as long the push button is pressed), pulse function (1 s) or two-button control (roll-down shutters/venetian blinds). The roll-down shutter/venetian blind function can only be supplied with direct current (dc).
Product details
Surface-mounting RF receiver with 2 channels, 12-24 Vac or Vdc
This surface-mounting receiver has 4 operating modes. You can connect one external impulse push button per channel. You may only use the device for switching low-voltage loads. The device has the following applications:
- ON/OFF via a 2-button function;
- ON when pressed and held, via push button function;
- control of roller blinds or shutters via 2-button function.
The roller blind and shutter function may only be supplied with direct current (DC).
Specification description
Surface-mounting RF receiver with 2 channels, 12-24 Vac or Vdc
- Not compatible with the wireless bridge, nor with the wireless smart hub
- Communication protocol: Easywave
- Operating frequency: 0.8683 GHz
- Dimensions (HxWxD): 63 x 70 x 35 mm
- Marking: CE
Related products
Niko dimmer switch for Hue system
With this wireless and battery-free dimmer switch, you can effortlessly operate Philips Hue lamps. Determine in the Philips Hue app what each button must do (switching on and off, dimming, activating scene settings). No wall breaking or cable installation is needed. The dimmer switch can be mounted on a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). Please note that Philips Hue Bridge v2 is required and not included.
Niko dimmer switch, KNX®
This wireless and battery-free dimmer switch in Niko design can operate as a switch, a dimmer, a roller shutter control or a scene selector in a KNX® system. This dimmer switch works together with the KNX® wireless media coupler (360-33001) who transmits the KNX® commands to the KNX® bus. This allows you to easily extend a KNX® system without breaking walls or installing extra cables. Configure the dimmer switch buttons with the ETS software that is available on the KNX® Association website together with the KNX® programming adapter (360-39001). The following communication objects can be linked to the buttons: single channel, dimming and shutter control. The supported functions are: on, off, toggle, up, down, darker, brighter, scene number, send value in percentage, in angle, in 2 bits, in 8 bits. Up to six button combinations can be configured. The dimmer switch can be mounted into a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).
Niko dimmer switch, EnOcean®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate EnOcean® certified wireless receivers (e.g. presence detectors with EnOcean® interface). No wall breaking or cable installation is needed. The pairing procedure with a wireless receiver determines the function of each button. Up to four buttons can be configured. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included).
