Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2.4 GHz wireless receivers that are located in the same room (e.g. presence and motion detectors with a Bluetooth® interface or smart lighting with integrated Bluetooth® technology from Casambi® or Xicato®). For best performance, follow the installation and radio planning guidelines. Configure the dimmer switch buttons with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato Control Software, SylSmart Standalone app...). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed onto a wall (screws not included) or glued to a flat surface with double-sided adhesive tape (included).
Product details
Niko dimmer switch, Bluetooth®
With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48, P42 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® or Xicato®. For best performance, follow the installation and radio planning guidelines. Configure each dimmer switch push button with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato® Control Software, SylSmart Standalone app, .. ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed on a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.
Specification description
Niko dimmer switch, Bluetooth®.
- Dimensions (HxWxD): 83 x 83 x 15 mm
- Power supply: integrated kinetic energy Harvester
- RF protocol: Bluetooth® Low Energy (BLE)
- Configuration: NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 and 3)
- Modulation: Gaussian frequency-shift keying (GFSK) / 1 Mbps
- Operating frequency: 2,4 GHZ (2402 to 2480 MHZ)
- Data rate: 1 Mbps
- Mounting height: 110 cm
- Temperature (storage / operating): -25°C - +65 °C
- Maximum range (indoor): up to 10 m. Depending on the smart lighting, the receiver can also act as a relay and augment the range
- Maximum RF power: 0,4 dBm
- Antenna: Integrated antenna
- Protection degree: IP20
- Marking: CE
- Number of control buttons: 4 control buttons
- Communication protocol: Bluetooth® Low Energy
- Maximum radio frequency power: 0.4 dBm
- Operating frequency: 2.4 GHz
- Fixing method
screw fixing or gluing
- Dimensions (HxWxD): 83 x 83 x 15 mm
- Weight: 25 g
- Marking: CE
Base for a wireless dimmer switch, 60 x 71 mm, claw fixing
Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Base for a wireless dimmer switch, 60 x 71 mm, screw fixing
Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Base for a wireless dimmer switch, 71 x 71 mm, claw fixing
Base with claw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Base for a wireless dimmer switch, 71 x 71 mm, screw fixing
Base with screw fixing for mounting a wireless dimmer switch (for Hue system, EnOcean®, Bluetooth® and KNX®). You can click it together and combine it with one or more flush-mounting mechanisms from Niko.
This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.
Double key, for wireless dimmer switch (Hue®, Bluetooth®, EnOcean®, KNX®), cream
This double key with two control buttons can be used for the wireless Niko dimmer switch for Hue system, EnOcean®, Bluetooth® and KNX®.
Conveniently control various lighting points.
Related products
Wireless battery-powered switch, 1-fold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Wireless battery-powered switch, 2-fold, Zigbee®
This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72002) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Wireless battery-powered switch, 4-fold, Zigbee®
This fourfold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72004) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the fourfold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72014). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
