1 RJ45 connection UTP Cat. 5E, PoE++ ready, flat model, incl. base 71 x 71 mm with screw fixing

Niko socket outlet with 1 RJ45 connection point UTP Cat. 5E, PoE++ ready.

It is used to make a network connection with 1 device for telephone, Ethernet, IP, PoE or internet applications.

The socket outlet is connected in a star configuration to the central connection cabinet using a cable of the same performance type.

The base has internal dimensions of 45 x 45 mm and external dimensions of 71 x 71 mm and is equipped with screw fixing. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

1 RJ45 connection UTP Cat. 5E, PoE++ ready, flat model, incl. base 71 x 71 mm with screw fixing.

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Dimensions (HxWxD): 73 x 73 x 33.2 mm
• Marking: CE

Universal base for 45 x 45 mm functions.

• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • with screws for simple fixing in a flush-mounting box with grip surfaces
• Centre-to-centre distance
  • horizontal coupling and vertical coupling with centre-to-centre distance 71 mm
  • horizontal connection of several bases is quick and perfect thanks to the folded-up dovetails on the left and right side
  • extra robustness due to the folded-up edges on the outside of the base and the continuation to the inside of the base
• End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
• Ambient temperature: -5 – +40 °C
• Dimensions (HxWxD): 73 x 73 mm
• Marking: CE

Adaptor 9.1, single, flat for RJ connectors 650-450xx

• Dimensions (HxWxD): 20.7 x 44.8 x 20.1 mm
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

Unshielded RJ45 connector UTP Cat. 5E, PoE++ ready, for bandwidths up to 100MHz

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE