Wireless switch with 4 control buttons
This wireless switch with four control buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper: on, lower: off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface for Niko Home Control (410-00099) or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001). This device is not compatible with the wireless bridge (550-00640).
Product details
Base for wireless switch with 4 control buttons
With this wireless switch, you control a maximum of 4 circuits, independent of one another, but dependent on the receiver settings. You use the switch for 1-key, 2-key and 4-key functions.
Specification description
Base for wireless switch with 4 control buttons.
- Not compatible with the wireless bridge, compatible with the wireless smart hub
- Function: wireless switch/push-button dimmer
- Number of control buttons: 4 control buttons
- Communication protocol: Easywave
- Maximum radio frequency power: -3.25 dBm
- Operating frequency: 0.8683 GHz
- Fixing method
screw fixing or gluing
- Dimensions (HxWxD): 71 x 103 mm
- Weight: 21 g
- Marking: CE
Double key for wireless switch or push button with 4 control buttons, cream
A double key for a bus push button with 4 control buttons. Finishing colour: cream.
Double key with 'I' and '0' symbols for wireless switch or push button with 4 control buttons, cream
A double key with the symbol "I" and "0" for a bus push button with 4 control buttons. Finishing colour: cream.
Double key with 'up' and 'down' arrows for wireless switch or push button with 4 control buttons, cream
A double key with the symbols up and down, for a bus push button with 4 control buttons. Finishing colour: cream.
Double key with ventilator symbols 0 to 3 for wireless switch or push button with 4 control buttons, cream
A double key for ventilator operation for a bus push button. Finishing colour: cream.
Related products
USB RF interface for Niko Home Control
The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000X) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.
Connected switching socket outlet with pin earthing and shutters, Zigbee®
The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.
