Wireless measuring module (3 channels)
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
Product details
Wireless measuring module (3 channels) for Niko Home Control
This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation.
You can use the measured values to:
- monitor electricity consumption, production and self-consumption, by using the Niko Home app
- receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control
- increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy
- control your peak consumption, by using the Niko Home Control peak mode
Specification description
Wireless measuring module (3 channels) for Niko Home Control
- Function: • Measuring of:
- total electricity consumption of a home that is connected to a single-phase supply network
- total electricity consumption of a home connected to a three-phase supply network 3P+N (400 Vac) or 3P (3 x 230 Vac)
- amount of electricity generated by photovoltaic solar panels
- consumption of specific circuits, such as the upper floor of a home
- consumption of individual devices, such as heat pumps, heat pump boilers, air conditioning and EV chargers
- Measuring via:
- 3 current clamps to measure the electrical current in several conductors
- 4 wires to measure the voltage of the phase
- Measured data available in app
- Measurement range: 100 W – 14 490 W, 0.44 A – 63 A
- Accuracy:
- more than 100 W: IEC62053-21 class 2 (R), class 2 (L)
- between 10 W and 100 W: 5 %
- Maximum cable size in the current clamp: 10 mm²
- Length of the connector cable to the current clamp: 90 cm
- Maximum RF range: 10 m (mesh networking support for longer range)
- Euroclass reaction to fire of cables: Eca
- Not suitable for measuring direct current components
- Measuring data for information purposes only, not valid for invoicing
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Maximum MCB rating: 16 A (limited by national installation rules)
- Maximum radio frequency power: 7.92 dBm
- Operating frequency: 2.4 GHz
- Ambient temperature: 0 – 40 °C
- Protection degree: IP20
- Dimensions (HxWxD): 86 x 86 x 37 mm
- Marking: CE
Related products
Connected switching socket outlet with pin earthing and shutters, Zigbee®
The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.
Wireless battery-powered switch, 1-fold, Zigbee®
This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.
