! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

DIN rail power supply for LED strips, 24 Vdc, 2.5 A/60 W

The 60 W power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Modular power supply 24 Vdc, 2,5 A, 60 W

Reference code
340-00050

This power supply is suitable for DIN-rail mounting. It has a power supply of 60 W. This power supply conforms to the European directive for EMC and safety.

Specification description

Modular power supply 24 Vdc, 2,5 A, 60 W.

  • Average active efficiency: 89%
  • Efficiency at low load (10%): 85%
  • Maximum MCB rating: 6 A (limited by national installation rules)
  • Maximum load: 60 W
  • Primary wire connection: double primary terminal connection: 1 x 2.5 mm² per screw terminal
  • Secondary wire connection: Fourfold secondary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
  • Protection degree: IP20
  • Safety protections: self-resetting, built-in protection against short-circuit, overload and overheating
  • Protection class: Class II device: SELV (safety extra low voltage), independent device
  • Usage: for indoor use only
  • DIN dimensions: 3U
  • Dimensions (HxWxD): 90 x 52.5 x 55 mm
  • Marking: CE
  • Weight: 453 g

Related products

Wireless 4-channel constant voltage controller

The 4-channel controller is suitable for controlling LED strips (constant voltage, common anode) from 12 to 24 Vdc. The controller has a maximum power of 50 W per channel for 12 Vdc LED strips and of 100 W per channel for 24 Vdc LED strips. The controller can control the following types of LED strips: RGB, RGBW, tunable white and monochrome. We recommend using the specifically designed RGB(W) wall controller in four button mode (article numbers 410-00002 + XXX-90002) for controlling the colour LED strips.

DIN rail power supply for LED strips, 24 Vdc, 100 W

The power supply is suitable for DIN rail mounting. The power supply is equipped with a primary input and four secondary terminals to connect two loads. Usage of screw terminals, both at primary and at secondary side. The output power range is adjustable. In compliance with the European directives for EMC and safety

Orientation lighting with white LEDs, 830 lux, 6500 K

Favorites ( 0 )