! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Presence detector, dual tech, PIR+HF, 230 V, master, 40 m / 12 m, IP54, for surface mounting

Stand-alone intelligent presence detector for ceiling mounting, ideal for offices. Suitable for switching indoor lighting. Rapid detection of even the slightest movements, thanks to passive infrared (PIR) and High Frequency (HF) technology. Presence detection behind office partitions by means of HF detection. The detector offers 5 possible combinations of the 2 technologies. Equipped with an integrated light sensor.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

Presence detector, dual tech, PIR+HF, 230 V, master, 40 m / 12 m, IP54, for surface mounting, white

Reference code
351-25475

Intelligent presence detector for ceiling mounting, ideal for offices. Suitable for switching indoor lighting. Rapid detection of even the slightest movements, thanks to passive infrared (PIR) and High Frequency (HF) technology. Automatically adjusts sensitivity according to the registered movements. Equipped with an integrated light sensor.

Finishing colour: white

Compatible secondary detectors: 351-25459, 351-25469

Specification description

Presence detector, dual tech, PIR+HF, 230 V, master, 40 m / 12 m, IP54, for surface mounting, white.

  • Detector technology: HF
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: 230 V (ON/OFF)
  • Maximum MCB rating: 10 A (limited by national installation rules)
  • Number of channels: 1 channel
  • Light intensity range: 5 lux – 2000 lux
  • Switch-off delay: pulse, 10 s – 20 min
  • Detection angle: 360°
  • Detection range (PIR): ø 40 m from a height of 3 m
  • Detection range (HF): ø 12 m from a height of 3 m
  • Ambient temperature: -20 – +45 °C
  • Mounting method: surface mounting
  • Mounting height: 2 – 4 m
  • Usage: for indoor use only
  • Relay contact: N.O. (max. 10 A), potential-free
  • Maximum load incandescent and halogen lamps (cosφ = 1): 2000 W
  • Maximum load fluorescent lamps (cosφ ≥ 0.5): 1150 VA
  • Maximum load low voltage halogen lamps: 1000 W
  • Maximum load economy lamps (CFLi): 300 W
  • Maximum load LED lamps 230 V: 300 W
  • Dimensions (HxWxD): 129 x 129 x 83 mm
  • Protection degree: IP54
  • Protection class: Class II device
  • Marking: CE

Accessories

Universal remote control for smartphone

Reference code
350-41936

The universal remote control is used for the configuration of detectors via a smartphone app. The Niko detector tool IR app is used to define settings and configuration and the universal remote control transmits the settings and configuration from the smartphone to the detector wirelessly.

Compatible articles: 350-20056, 350-20070, 350-20072, 350-20078, 350-20080, 350-20082, 350-20085, 350-41600, 350-41620, 350-41650, 350-41657, 350-41659, 350-41680, 350-41750, 350-41751, 350-41752, 350-41753, 350-41760, 350-41761, 350-41762, 350-41763, 350-41780, 350-41781, 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572

Specification description

Universal remote control for smartphone

  • 350-41936
    Colour white
    Reference code 350-41936
Technical datasheets
Technical manuals
Certificaten CE-Marking

IR remote control

Reference code
351-25320

The IR remote control is used to control and configure Niko detectors.

Compatible articles: 350-500111, 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572

Specification description

IR remote control

Technical datasheets
Certificaten CE-Marking

IR remote control for users

Reference code
351-25310

AUTO: Activate automatic mode

  • Press this button to activate the automatic mode.

ON: Switch on light for 6 hours

  • Press this button to switch the light on constantly for 6 hours. After that time, the detector resumes its automatic operation. Please note: this button cannot be used if the TIME setting is on pulse.

OFF: Switch off light for 6 hours

  • Press this button to switch the light off completely for 6 hours. After that time, the detector resumes its automatic operation. Please note: this button cannot be used if the TIME setting is on pulse.

Compatible articles: 351-25050, 351-25065, 351-25340, 351-25451, 351-25457, 351-25463, 351-25467, 351-25475, 351-26450, 351-26470, 351-26480, 351-26560, 351-26562, 351-26570, 351-26572

Specification description

IR remote control for users

Related products

Presence detector, 230 V, secondary, 14 m, round, for flush-mounting box

The presence or absence detector for flush mounting in ceilings is suitable for switching the indoor lighting on and off. Automatic on/off (presence detector) or manual on/automatic off (absence detector). The detection area can be divided by means of an adjustable cover mask.

Presence detector P48MR, DALI-2, master, 12-13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48LR, DALI-2, master, 32-37 m, for flush mounting (SnapFit)

This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Favorites ( 0 )