Lighting control module, 230 V, 3-30000 lux

With this device, you can save substantial energy by making optimal use of natural daylight. This modular lighting control is used in combination with a photocell and one or more motion detectors. If there is insufficient daylight and motion is detected, then the lighting is automatically switched on. The lighting is automatically switched back off again when there is sufficient daylight or after the pre-set switch-off delay. Manual control is also possible using the N.O. push button. This lighting control is suitable for indoor and outdoor applications. It has an IP20 protection degree and conforms to the European directive for EMC and safety EN60669-2-1.

Lighting control module, 230 V, 3-30000 lux.

Niko modular lighting control to be used in combination with a Niko photocell and Niko motion detector(s). Automatic activation is dependent on the level of daylight measured and the motion detected. Automatic OFF in sufficient daylight or after switch-off delay. Optional control via N.O. push button. Suitable for indoor and outdoor applications.

• Secondary voltage: 24 Vdc ±10 %.
• DIN 2TU
• Detector technology: lux
• Input voltage: 230 Vac/24 Vdc
• Detector output: 230 V (ON/OFF)
• Maximum MCB rating: 10 A (limited by national installation rules)
• Number of channels: 1 channel
• Light intensity range: 3 lux – 30000 lux
• Hysteresis on light sensitivity: (wrong type for option)
• Ambient temperature: 5 – 50 °C
• Usage: for outdoor and indoor use
• Relay contact: N.O. (max. 10 A)
• Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
• Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
• Maximum load low voltage halogen lamps: 500 W
• Maximum capacitive load: 140 µF
• Dimensions (HxWxD): 90 x 35 x 55 mm
• Protection degree: IP20
• Marking: CE