! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

DALI-2 relay module for flush mounting

This relay module enables you can control non-dimmable 230 V loads via a DALI bus. It allows lighting ballasts with no DALI interface to be switched ON and OFF by DALI commands. The maximum switching current of the relay module is 4 A. The lifetime of the integrated relay contact is extended by zero-cross switching technology. The relay module fulfils DALI requirements IEC 62386 parts 102 (control gear) and 208 (DALI device type 7). The DALI addressing and configuration is done via the Niko detector tool app. The DALI relay module is directly connected to and powered by the DALI bus. Note that a separate DALI bus power supply is required. The relay module is suitable for flush mounting. Check its dimensions to select the appropriate flush-mounting box.

Product details

This product consists of several components. Below you will find an overview of all the component parts.
Technical datasheets
Technical manuals
Certificaten CE-Marking

DALI-2 relay module for flush mounting

Reference code
310-02310

This relay module enables you can control non-dimmable 230 V loads via a DALI bus. It allows lighting ballasts with no DALI interface to be switched ON and OFF by DALI commands. The maximum switching current of the relay module is 4 A. The lifetime of the integrated relay contact is extended by zero-cross switching technology. The relay module fulfils DALI requirements IEC 62386 parts 102 (control gear) and 208 (DALI device type 7). The DALI addressing and configuration is done via the Niko detector tool app. The DALI relay module is directly connected to and powered by the DALI bus. Note that a separate DALI bus power supply is required. The relay module is suitable for flush mounting. Check its dimensions to select the appropriate flush-mounting box.

Specification description

DALI-2 relay module for flush mounting.

  • Configuration: DALI, DALI-2
  • Maximum switching current, cosφ = 0.6: 4 A
  • Maximum switching frequency: 1 Hz
  • Input voltage: via the DALI bus
  • Nominal current consumption (12 V, 25°C): 2.7 mA
  • Maximum MCB rating: 10 A (limited by national installation rules)
  • Ambient temperature: -20 – +60 °C
  • Mounting method: flush-mounting box (behind the switch)
  • Usage: for indoor use only
  • Relay contact: N.O. (max. 4 A), potential-free
  • Stripping length
    • 8.5 – 9.5 mm stripping length
  • Dimensions (HxWxD): 32.5 x 15 x 58.5 mm
  • Modification of settings: Niko detector tool app (in combination with Niko DALI-2 detectors), BMS software (in combination with Niko DALI-2 BMS detectors) or manually (in stand-alone mode)
  • Protection degree: IP20
  • Impact resistance: IK02
  • Marking: CE

Related products

Presence detector P48MR, DALI-2, master, 12-13 m, for flush mounting (SnapFit)

This flat and discrete presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48LR, DALI-2, master, 32-37 m, for flush mounting (SnapFit)

This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly using push buttons. The SnapFit mounting bracket ensures a quick and stable mounting in all types of suspended ceilings with or without removable tiles. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Presence detector P48MR, DALI-2, master, 12-13 m, IP54, for surface mounting

This presence detector is a DALI-2 master for DALI lighting control in up to 4 zones. The detector is fitted with multiple functions and can be controlled wirelessly by push buttons. It is designed for surface mounting and has an IP54 protection degree. The lighting zones are defined during commissioning, using the Niko detector tool app and 2-way Bluetooth® communication between a smartphone and the detector.

Favorites ( 0 )