DALI-2 push-button interface with four potential-free inputs

The DALI-2 push-button interface allows you to control DALI-2 control gear with a traditional push button or switch. The push-button interface is equipped with four potential-free inputs to connect maximum four standard push buttons or switches. Each input converts a mechanical actuation into a DALI-2 command. The DALI-2 commands are predefined per input and can be customised via the Niko detector tool app. The DALI-2 input module is directly connected to and powered by the DALI bus. Note that a separate DALI bus power supply is required. The push-button interface is suitable for flush mounting. Check the dimensions of the push-button interface to select the appropriate flush-mounting box.

DALI-2 push-button interface with four potential-free inputs.

• Configuration: DALI, DALI-2, Multimaster
• Number of DALI-2 adresses: 1
• Minimal control pulse length: 40 ms
• Maximum wire length: 50 cm
• Input voltage: via the DALI bus
• Nominal current consumption (12 V, 25°C): 1.7 mA
• Ambient temperature: -20 – +75 °C
• Mounting method: flush-mounting box (behind the switch)
• Usage: for indoor use only
• Stripping length
  • 8.5 – 9.5 mm stripping length
• Dimensions (HxWxD): 40.7 x 28 x 14.2 mm
• Modification of settings: Niko detector tool app (in combination with Niko DALI-2 detectors), BMS software (in combination with Niko DALI-2 BMS detectors) or manually (in stand-alone mode)
• Protection degree: IP20
• Impact resistance: IK02
• Marking: CE