Dimming - Help! I can't dim the lighting to a minimum with a 1-10V current control.

This situation may occur with Niko modular dimmer 330-00701 when it is not connected to the Niko 1-10V rotary control 310-0110x.

The modular dimmer 330-00701, which is configured for 1-10V control, will switch off the connected lighting circuit when the input voltage falls beneath a threshold voltage (± 1.5 Vdc). If you use another type of 1-10V control, and you wish to dim your lighting circuit to a minimum, you must put a resistor of 10k Ohm in series with the +-line of the 1-10V connection.