Connected motor control, base, 3 A, 71 x 71 mm, claw fixing, Zigbee®

The connected Zigbee® motor control contains a switching contact to control a 230 V motor. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001).

You can use the connected motor control to replace a conventional motor control. The connected motor control can switch its own contacts.

With the addition of the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

Connected motor control, base, 3 A, 71 x 71 mm, claw fixing, Zigbee®.

• max. load per channel: 10 A
• modification of settings: Niko Home Control programming software or Niko Home App (requires smart hub)
• maximum load: 3 A
• maximum range (from switch to smart hub): 10 m
• Maximum number per installation: 50 connected Zigbee® devices
• Compatible with the wireless bridge
• Function: motor control
• LED colour: white
• Maximum MCB rating: 16 A (limited by national installation rules)
• Communication protocol: Zigbee® 3.0
• Maximum radio frequency power: 10 dBm
• Operating frequency: 2.4 GHz
• System compatibility: talks with Homey (Zigbee®)
• Protection degree: IP20
• Flush mounting depth: 40 mm
• Required type of flush-mounting box
  • depth: min. 40 mm (cabling space included)
  • claw/screw fixing: 60 mm
  • inner diameter box: 60 mm
  • multiple boxes centre distance horizontal: 71 mm
  • multiple boxes centre distance vertical: 71 mm
  • multiple boxes centre distance vertical: 60 mm for Belgium and France
• Fixing method
  • simple mounting in a flush-mounting box with grip surfaces
  • with claws that rotate open using screws with a combination screwhead (Pz2 or slot 1 x 5.5 mm), for mounting in a flush-mounting box with grip surfaces
  • engagement depth of claws: 23.5 mm
  • claws turn back completely when loosened
• Centre-to-centre distance
  • horizontal coupling and vertical coupling with centre-to-centre distance 71 mm
  • horizontal connection of several bases is quick and perfect thanks to the folded-up dovetails on the left and right side
  • extra robustness due to the folded-up edges on the outside of the base and the continuation to the inside of the base
• Wire capacity
  • up to 2 x 2.5 mm² wire per terminal
• Ambient temperature: 0 – 40 °C
• Dimensions (HxWxD): 73 x 73 x 38.6 mm
• Weight: 70 g
• Certification marks: Zigbee Certified Product
• Marking: CE