Presence detector, DALI, secondary, 12 m, flat, for flush mounting, white

This presence detector (DALI daylight control, secondary) is suitable for flush-mounting in ceilings with a height of 2.4 – 3 m and can only be used in combination with a master to increase its detection range. The detector has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. The device follows the settings of the master. The sensitivity of the secondary detector, though, can be set separately. A maximum of ten secondary detectors can be connected per master.

Finishing colour: white

Compatible master detectors: 350-41650, 350-41657, 350-41680

Presence detector, DALI, secondary, 12 m, flat, for flush mounting, white.

• Detector technology: PIR
• Input voltage: via the DALI bus
• Detection angle: 360°
• Detection range (PIR): ø 12 m from a height of 3 m
• Ambient temperature: -5 – +40 °C
• Mounting method: flush-mounting
• Drill diameter: 77 mm
• Mounting height: 2.5 – 3 m
• Usage: for indoor use only
• Dimensions (HxWxD): 95 x 95 x 95 mm
• Dimensions visible (HxWxD): 95 x 95 x 5 mm
• Protection degree: IP20
• Marking: CE