! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Presence detector, DALI, master, 12 m, flat, for flush mounting, white

Reference code
350-41657

Description

Presence detector, DALI daylight control for flush-mounting in ceilings of 2.4 - 3 m. Standalone or as master combinable with a maximum of 10 secondary detectors. For use in offices, schools, conference rooms… in large and small spaces. The detector has a maximum of 3 daylight controlled zones and has a very flat design of only 5 mm, so that it can be mounted almost flush with the ceiling. Depending on the chosen application the lighting must always be switched on manually using a push button, and is automatically switched off if there is sufficient daylight or no one is in the room (absence detector). Or the lighting is switched on automatically when movement is registered and there is insufficient daylight. In this case, the lighting is also automatically switched off if there is sufficient daylight or no one is in the room (presence detector). The lighting remains on as long as the detector detects movement and the measured level of daylight is lower than the set value. The switch-off delay, the lux value at which the lighting must switch on and the sensitivity of the detector can easily set with the IR remote control (optional).

Finishing colour: white

Compatible secondary detectors: 350-41659

Specification description

Presence detector, DALI, master, 12 m, flat, for flush mounting, white.

  • Function: detector 350-41657
  • Detector technology: PIR
  • Input voltage: 230 Vac ± 10 %, 50 Hz
  • Detector output: DALI Addressable
  • Maximum MCB rating: 10 A (limited by national installation rules)
  • Maximum number of dimmable zones: 3
  • Light intensity range: 100 lux – 1000 lux
  • Switch-off delay: 5 min – 1 h, ∞
  • Detection angle: 360°
  • Detection range (PIR): ø 12 m from a height of 3 m
  • Ambient temperature: -5 – +40 °C
  • Mounting method: flush-mounting
  • Drill diameter: 77 mm
  • Mounting height: 2.5 – 3 m
  • Usage: for indoor use only
  • Dimensions (HxWxD): 95 x 95 x 95 mm
  • Dimensions visible (HxWxD): 95 x 95 x 5 mm
  • Protection degree: IP20
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )