Motion detector, 230 V, 9 m, for flush-mounting box, white

The one channel motion detector is suitable for automatic indoor lighting control (on/off). It can be installed in a flush-mounting box in the ceiling. Spring clips and an IP54 surface-mounting box can be ordered separately. In conformity with the European directive for EMC and safety EN60669-2-1.

Finishing colour: white

Motion detector, 230 V, 9 m, for flush-mounting box, white.

• Detector technology: PIR
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Detector output: 230 V (ON/OFF)
• Maximum power consumption: 0.5 W
• Maximum MCB rating: 10 A (limited by national installation rules)
• Number of channels: 1 channel
• Light intensity range: 10 lux – 2000 lux, ∞
• Switch-off delay: pulse, 30 s – 30 min
• Activation delay: 1 s
• Detection angle: 360°
• Detection range (PIR): ø 9 m from a height of 3 m
• Ambient temperature: -20 – +45 °C
• Mounting method: flush-mounting box
• Mounting height: 2 – 3.5 m
• Usage: for indoor use only
• Relay contact: N.O. (max. 10 A)
• Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
• Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
• Maximum load low voltage halogen lamps: 1200 W
• Maximum load economy lamps (CFLi): 800 W
• Maximum load LED lamps 230 V: 300 W
• Maximum load electronic transformer: 1200 VA
• Maximum capacitive load: 140 µF
• Colour: white (approximately RAL 9010)
• Dimensions (HxWxD): 105 x 105 x 62.5 mm
• Dimensions visible (HxWxD): 105 x 105 x 40.5 mm
• Protection degree: IP20
• Protection class: Class II device
• Marking: CE