! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

PWM-dimmer for LED strips, 8 – 24 Vdc, max. 100 W

Reference code
340-00048

No longer available since October 2024

Technical datasheets
Technical manuals
Certificaten CE-Marking

Description

The PWM dimmer is used to dim LED strips with monochrome LEDs, with a maximum power of 100 W (comparable with 40 Niko LED strips). The light intensity is dimmed linearly with an N.O. push button. Switch on and off by pressing the N.O. push button briefly, and hold down to dim up and down.

Specification description

PWM-dimmer for LED strips, 8 – 24 Vdc, max. 100 W.

  • frequency: 295 Hz
  • Input voltage: 8 - 24 Vdc
  • Output voltage: 8 - 24 Vdc
  • Primary wire connection: double primary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
  • Secondary wire connection: double secondary terminal connection: 1 x 2.5 mm² or 2 x 1.5 mm² per screw terminal
  • Efficiency: 0.98
  • Maximum housing temperature (Tc): 55 °C
  • Protection degree: IP20
  • Safety protections: protected against inverse polarity, overheating, overload and short-circuit
  • Protection class: Class II device: SELV (safety extra low voltage), independent device
  • Usage: for indoor use only
  • Marking: CE
  • Weight: 447 g

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )