Socket outlet 71x71 with side earthing and plug-in terminals, base and finishing set white coated

Two-pole flush-mounting socket outlet 16 A ~ 250 V, with side earthing and central plate (flush-mounting depth 28.5 mm). The socket outlet is provided with contact busses with a large contact surface that do not rest on the base in order to clasp and plug-in terminals with releases. These releases can be controlled from the front side by hand or with a screwdriver.

Socket outlet 71x71 with side earthing and plug-in terminals, base and finishing set white coated

Two-pole, flush-mounting socket outlet, 16 A~ 250 V, with side earthing and central plate (flush-mounting depth 28.5 mm). The socket outlet is equipped with contact busses with a large contact surface area which do not rest on the base in order to clasp and plug-in terminals with releases. These releases can be operated manually or with a screwdriver from the front side. The base of the socket outlet is made of urea-formaldehyde (UF), light grey RAL7035. The base is highly heat resistant; it does not melt when exposed to high temperatures, as opposed to thermoplasts. All connection terminals are located at the top of the base and can contain up to 2 x 2.5 mm² of wire. The stripping length (14 mm) of the wires is indelibly imprinted on the back of the base. The flush-mounting frame is made of 1 mm-thick metal and after cutting is galvanized on all sides, even on the cut edges. On the horizontal and vertical axes, the flush-mounting frame has 4 grooves for screw mounting in flush-mounting boxes. These grooves have a screw aperture of 7 mm. For mounting on panels, the flush-mounting frame is equipped with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm. The middle of the flush-mounting frame is indicated (chalk line, laser, ..) in both the horizontal and vertical directions, so that mounting one or more switches can be quickly and easily carried out. On all sides, the flush-mounting frame is equipped with folded-up dovetails, allowing for a quick and perfect horizontal and vertical coupling of several flush-mounting frames. The folded-up edges on the outside of the flush-mounting frame and their continuation to the inside lend an additional robustness to the frame. The 4 rectangular openings (7x2.5 mm) in the flush-mounting frame can compensate for a margin of 1 to 1.2 mm if the flush-mounting box protrudes beyond the plasterwork. In the case of such a margin, the faceplate can still butt up perfectly against the wall. The central plate is fixed on a flush-mounting socket outlet using a screw with a combination screwhead (Pz1 slot 1x5.5 mm). This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. Thanks to the snap hooks, the construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge of the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, central plate and socket outlet), no metal parts are visible thanks to the flat edge of the central plate. The combination of a socket outlet, central plate and faceplate has a protection degree IP21. The plastic parts of the central plate comply with a filament test of 650°C, and they are halogen-free. The central plate is made of rigid PC + ASA and is enamelled White. After mounting, an impact-resistance degree of IK06 is guaranteed. Dimensions central plate with flat edge: 56x56 mm; dimensions central plate visible part: 45x45 mm. Flush-mounting depth socket outlet = 28.5 mm. Surface-mounting height = max. 9.2 mm. ÖVE, Kema and VDE approved.