! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

Finishing set for pull switch, anthracite coated

Reference code
122-63606

Description

Central plate with pull-cord mechanism. The lighting point is operated by the pull system. This application is usually used in bedrooms. Finishing colour: anthracite coated.

Specification description

Finishing set for pull switch, anthracite coated. This central plate is surrounded with a flat edge that is equipped at all 4 corners with a rectangular opening, each containing a multi-positional snap hook. The construction of the central plate ensures that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The flat edge around the central plate also has 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate. After mounting all components (faceplate, finishing set and switch), no metal parts are visible thanks to the flat edge of the central plate.

  • Function: The key and the intermediate plate (board) form one unit.
  • Material central plate: The central plate is enamelled and made of rigid PC and ASA.
  • Colour: enamelled anthracite (approximately NCS S 7502 - R, RAL 7022)
  • Dismantling: To dismount (after removing the screw), the pull module must be first pushed upward and then clicked out using a screwdriver. This is indicated by a screwdriver symbol and an arrow. Dismounting is carried out using a slotted screwdriver.
  • Protection degree: The combination of a mechanism, a central plate and a faceplate has a protection degree of IP31D
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Fire safety
    • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
    • the plastic parts of the central plate are halogen-free
  • Dimensions of finishing with flat edge: 56 x 56 mm (HxW)

Dimensions of visible area of finishing: 45 x 45 mm (HxW)

  • Dimensions (HxWxD): 55.8 x 55.8 x 19.5 mm
  • Certification marks: CEBEC, SEMKO, VDE, DEMKO, NF, KEMA, ÖVE
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )