Finishing set with 2 cinch audio connections, also for flush mounting in cable trunking systems, white

Finishing set for audio with two cinch connections. Finishing colour: white.

Finishing set with 2 cinch audio connections, also for flush mounting in cable trunking systems, white.

• Function
  • The central plate is clicked into a 45 x 45 mm flush-mounting frame and must always be mounted with the 'TOP arrow' (indelibly imprinted on the rear of the central plate) pointing upwards
  • The central plate is equipped with a white and a red cinch connector which are connected along the rear with two connector blocks
• Material central plate: The central plate is made of rigid PC and ASA. The base material is mass-dyed.
• Colour: white (mass-dyed, approximately NCS S 0502 - Y50R, RAL 9010)
• Fire safety
  • the plastic parts of the central plate are self-extinguishing (comply with a filament test of 650 °C)
  • the plastic parts of the central plate are halogen-free
• Wire connection
  • each connector block is equipped with cage clamps with permanent screws with a slotted screwhead (slot 0.6 x 3.5 mm)
  • every screw is provided with a screwdriver slot that prevents the screwdriver from sliding off the screwhead.
• Dismantling: To dismount simply pull the central plate off the base.
• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
• Marking: CE