Indoor motion detector 110°, 6 m, 3-wire (relay), base and finishing set, white

This flush-mounting motion detector is extremely well-suited for placement in small rooms. With a 110° detection angle, this motion detector switches the lighting in these rooms. The time the light remains on is adjustable. The light switches off automatically.

Finishing colour: white

Indoor motion detector 110°, 6 m, 3-wire (relay), base and finishing set, white.

• Function: The integrated motion detector has a detection angle of 110° horizontally, 20° sideways and 60° vertically within which all motion is detected. When a motion is detected, pre-selected lights are activated. The time the light remains on is adjustable. The light switches off automatically. Parallel connection of the automatic switch is not permitted. Particularly suitable as a staircase function.
• Colour: white high gloss (mass-dyed, approximately NCS S 0500-N Glossy, RAL 9003)
• Maximum load incandescent and halogen lamps (cosφ = 1): 1000 W
• Maximum load fluorescent lamps (cosφ ≥ 0.5): 800 VA
• Mounting height: 0.8 – 1.2 m
• Switch-off delay: 15 s – 20 min
• Detection range (PIR): 6 m deep and 4.5 m sideways
• Detection angle horizontal: 110°
• Sideways detection angle: 20°
• Detection angle vertical: 60°
• Material central plate: The central plate is made of rigid PC and ASA. The base material is mass-dyed.
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • with claws that can be rotated open using screws with a slotted screw head (slot 0.8 x 5 mm), for mounting in a flush-mounting box with grip surfaces
  • depth of engagement of claws: 31 mm
  • claws turn back completely when loosened
• Wire connection
  • the sockets are equipped with screw terminals for clamping the wires.
• Input voltage: 230 Vac ± 10 %, 50 Hz
• Marking: CE