Single controller of the RF-system io-homecontrol®, cream

These controls are part of the wireless system io-homecontrol®. Transmission of the signals occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. These controls are ideal for new construction as well as for renovations. Installing, moving and adding controls has never been so easy. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers.

All parts simply click together. Each controller can be finished with surround plates from the Niko range. The controller mechanism is equipped with a programming key so the system can be programmed and reprogrammed without drilling or channelling work. There are 4 types of controllers. All controllers are available in any colour in the Niko switching material pallet.

1XX- 50001

The single Niko io-homecontrol® controller is designed for switching a lighting circuit on and off. The controller can be used with the Niko switch receiver (with controller) and the Niko LED dimmer receiver.

1XX-50002

The double Niko io-homecontrol® controller is designed for switching 2 lighting circuits on and off. The controller can be used with the Niko switch receiver (with controller) and the Niko LED dimmer receiver.

1XX-50003

The Niko io-homecontrol® LED-dimmer controller is suitable for both switching LED lighting on and off and for dimming LED lighting. The controller can be used with the Niko switch receiver (with controller) and the Niko LED dimmer receiver.

1XX-50004

The Niko io-homecontrol® ventilation controller is suitable for controlling a Renson ventilator with an io-homecontrol® motor.

Single controller of the RF-system io-homecontrol®, cream

These Niko controls are part of the RF (Radio Frequency) system, io-homecontrol®, a wireless installation technique between the control points (switches) and the receivers to be operated. Transmission occurs via radio waves between 868MHz and 870MHz. Only products that do not transmit continuously are permitted between these frequencies; this ensures that there is no interference. As a result, the commands sent will always arrive securely at the receiver and vice versa.

These controls are ideal for new construction as well as for renovations. Installing, moving and adding controls has never been so easy. Each controller can control an unlimited number of receivers simultaneously. Each receiver can be controlled by up to 16 controllers.

The package contains:

- plastic bridge: this can be affixed or screwed to the wall

- control mechanism

- finishing set - battery: type CR2430 Lithium 3V

- 2 screws, plugs and double-sided adhesive pads

- user manual

The 3 parts of the controller simply click together. Each controller can be finished with surround plates from the Niko range. The controller mechanism is equipped with a programming key. This key is hidden by the finishing set but ensures that the system can be programmed and reprogrammed using the controller without drilling or channelling work. There are 4 types of controllers. All controllers are available in any colour in the Niko switching material pallet.

1XX- 50001

The single controller is designed for switching a lighting circuit on and off. It is suitable for use with the Niko flush-mounting receiver (switch receiver) with controller, the Niko LED receiver (LED-dimmer receiver) as well as the Niko receiver (switch receiver)

1XX-50002

The double controller is designed for switching 2 lighting circuits on and off. It is suitable for use with the Niko flush-mounting receivers (switch receivers) with controller, the Niko LED receivers (LED-dimmer receivers) as well as the Niko receivers (switch receivers).

1XX-50003

The LED-dimmer controller is suitable for both switching LED lighting on and off and for dimming LED lighting. It is suitable for use with the Niko flush-mounting receivers (switch receivers) with controller, the Niko LED receivers (LED-dimmer receivers) as well as the Niko receivers (switch receivers).

1XX-50004

The ventilation controller is suitable for controlling a Renson ventilator with an io-homecontrol® motor.

• Marking: CE