2 RJ45 connections STP Cat. 6A, PoE++ ready, flat model, incl. base 71 x 71 mm with screw fixing

This mechanism with 2 RJ45 connection points STP Cat. 6A, PoE++ ready, flat model, is used to make a network connection with 2 devices for telephone, Ethernet, IP, PoE or internet applications. Due to its high quality, this type also offers the possibility to transmit TV distribution signals for analogue, digital and interactive TV images. The mechanism is connected in a star configuration to the central connection cabinet using a cable of the same performance type. The shielding ensures a more malfunction-resistant connection. The base has internal dimensions of 45 x 45 mm and external dimensions of 71 x 71 mm and is equipped with screw fixing. A PoE adapter is required to transport both data and power via the connector. A PoE adapter can be both a PoE injector or a PoE splitter. A finishing set in the colour of your choice must be ordered separately.

This article is protected by at least one patent (application). For more info on patents, see www.niko.eu/innovation.

2 RJ45 connections STP Cat. 6A, PoE++ ready, flat model, incl. base 71 x 71 mm with screw fixing.

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Dimensions (HxWxD): 73 x 73 x 33.2 mm
• Marking: CE

Universal base for 45 x 45 mm functions.

• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Flush-mounting frame
  • 1 mm-thick metal
  • galvanized on all sides after cutting, even on the cut edges
  • with 4 grooves with screw hole of 7 mm
  • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
• Fixing method
  • with screws for simple fixing in a flush-mounting box with grip surfaces
• Centre-to-centre distance
  • horizontal coupling and vertical coupling with centre-to-centre distance 71 mm
  • horizontal connection of several bases is quick and perfect thanks to the folded-up dovetails on the left and right side
  • extra robustness due to the folded-up edges on the outside of the base and the continuation to the inside of the base
• End border: The flush-mounting frame is equipped, both on the top and the bottom, with a dark grey, plastic end border. This border is made of PC+ASA and is joined to the flush-mounting frame using a melting process. The corners of the two end borders are equipped with rectangular openings (7.9 x 1.5 mm) each containing a multi-positional snap hook. Thanks to the snap hooks, the 4 rectangular openings ensure that the faceplate can always be attached flat to the wall, even in cases of untidy plasterwork. This works in two directions: If the flush-mounting box sticks out of the plasterwork, the multi-positional snap hooks can compensate for a 1 to 1.2 mm margin; if the flush-mounting box is sunk too deeply in the plasterwork, the snap hooks can compensate for up to a 1.8 mm margin. The end borders also have 4 round openings that ensure the correct positioning of the faceplate in relation to the central plate.
• Ambient temperature: -5 – +40 °C
• Dimensions (HxWxD): 73 x 73 mm
• Marking: CE

Adaptor 9.1, single, flat for RJ connectors 650-450xx

• Dimensions (HxWxD): 20.7 x 44.8 x 20.1 mm
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE

Shielded RJ45 connector STP Cat. 6A, PoE++ ready, for bandwidths up to 500MHz

• Service: 4PPoE
• PoE standard: IEEE 802.3BT Type 4
• Maximum power Component (at PD): 72 W
• Maximum power Source (at PSE): 100 W
• Voltage range (at PSE): 50.0-57.0 V
• Voltage range (at PD): 42.5-57 V
• Maximum current: 860 mA
• Pairs with current: 4
• Maximum cable resistance per pair set: 12.5 Ω
• Power management: Three power class levels negotiated by signature or 0.1 W steps negotiated by LLDP
• Derating of maximum cable ambient operating temperature: 10 °C (20 °F) with more than half of bundled cables at Imax
• Supported cabling: Category 5
• Supported modes: Mode A, Mode B, 4-pair mode
• Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
• Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
• Marking: CE