Switches and sockets

Connected switching socket outlet with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Digital black, connected customisable control screen, 230 V

Digital black is a customisable control screen for Niko Home Control with an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. When there is no Niko Home Control installation available, the built-in switching contact can be controlled via the touchscreen or an N.O. push-button extension (170-X00XX). When the connection to a Niko Home Control installation has been made, it becomes possible to switch or dim your lights, set scenes, set ventilation modes and adjust blinds and sunblinds to the desired position in one operation. In short, all possible Niko Home Control control types are available. Do you have an active connection with one of our heating partners? Then you can easily set the temperature with the Digital black. With the Niko Home app you can choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the App store or the Google Play store. Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered on 230 Vac (L- + N-wire required). This 230 Vac variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional controls from the Niko Home Control range for traditional wiring, you can easily add automation to your conventional installation. The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.

Connected switching socket outlet with side earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Socket outlet without earthing and with shutters

• flush-mounting depth: 21 mm

Socket outlet with side earthing and shutters

• centre distance: 71 mm • flush-mounting depth: 28.5 mm

Socket outlet with side earthing, shutters and voltage indication

• flush-mounting depth: 34 mm

Socket outlet with pin earthing and shutters

Belgian earthing system for special installations. • flush-mounting depth: 28.5 mm

Socket outlet with pin earthing, shutters and hinged lid

• flush-mounting depth: 28.5 mm

Socket outlet with pin earthing and shutters, limited flush-mounting depth

• flush-mounting depth: 21 mm

Socket outlet with pin earthing, shutters and voltage indication

• flush-mounting depth: 34 mm

Coloured socket outlet with side earthing and shutters

For emergency power supply (e.g. in hospitals): • green for e.g. general power supply, • orange for e.g. power supply of no break networks, • red for e.g. power supply of data networks. The base and the finishing set have the same colour.

Double potential-equalisation socket outlet

• centre distance: 20 mm • 1 x 6 mm² and 4 x 2.5 mm²

Double socket outlet with pin earthing and shutters, pre-wired, horizontal, limited flush-mounting depth

For mounting into a double flush-mounting box without dividing wall.

Dual smart USB-A and USB-C charger, 3.5 A

This smart USB charger charges one or two mobile devices, such as mobile telephones, tablets, cameras, MP3 players and navigational devices. The devices must be suitable for charging via a USB-A or USB-C port. The "smart" functionality ensures that the mobile device is charged in the fastest way possible (dynamic device recognition). The current is divided over both outputs and amounts to 3.5 A maximum over both outputs combined. The maximum current amounts to 3.5 A on the individual output. When both outputs are used simultaneously, the available current will be divided. 5.0 V is delivered per output. The power depends on the current and voltage and amounts to 17.5 W maximum on both outputs combined.

Double socket outlet with pin earthing and shutters, pre-wired, horizontal

For mounting into a double flush-mounting box without dividing wall.

Dual smart USB-A charger, 3.5 A

This smart USB-A charger charges one or two mobile devices, such as mobile telephones, tablets, cameras, MP3 players and navigational devices. The devices must be suitable for charging via a USB port. The "smart" functionality ensures that the mobile device is charged in the fastest way possible (dynamic device recognition). The current is divided over both outputs and amounts to 3.5 A maximum over both outputs combined. The maximum current amounts to 3.5 A on the individual output. When both outputs are used simultaneously, the available current will be divided. 5.0 V is delivered per output. The power depends on the current and voltage and amounts to 17.5 W maximum on both outputs combined.

Double socket outlet with side earthing and shutters, pre-wired, horizontal

• flush-mounting depth: 28.5 mm

Double socket outlet without earthing, vertical

For mounting into a single flush-mounting box. Attention: Without shutterss.

Double socket outlet with side earthing and shutters, vertical

Including faceplate with integrated central plate. For mounting into a single flush-mounting box.

Double socket outlet with pin earthing and shutters, vertical

Including faceplate with integrated central plate. For mounting into a single flush-mounting box.

Coloured socket outlet with pin earthing and shutters

For emergency power supply (e.g. in hospitals): • green for e.g. general power supply, • orange for e.g. power supply of no break networks, • red for e.g. power supply of data networks. The base and the finishing set have the same colour.

Coloured socket outlet with pin earthing, shutters and voltage indication

For emergency power supply (e.g. in hospitals): • green for e.g. general power supply, • orange for e.g. power supply of no break networks, • red for e.g. power supply of data networks. The base and the finishing set have the same colour. The base has a green LED.

Single-pole switch

Two-pole switch