Products for traditional wiring

You want to make your home smarter but you're not planning on building a new house or knocking down walls to replace your electrics? No problem! Niko Home Control can be installed using traditional electrical wiring.

Depending on what you would like to include, you can replace your existing switches and socket outlets with controls which make your electrical installation smarter by wirelessly communicating with one another. So you can install your Niko Home Control when and wherever you like. And because your existing system is reused, you can opt for Niko Home Control without the added cost of new wiring.

Traditional wiring uses classic 230V electrical wiring that only carries electricity. In a regular electrical installation with electrical wiring, you use one switch to control the items that are connected to that switch via the cables. The switches and socket outlets by Niko Home Control for traditional wiring, communicate wirelessly with a central smart hub. So you can control your lighting and roll-down blinds with your smartphone or operate everything in one go using one button.

Software guides

What is home automation?

Wireless smart hub for Niko Home Control

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.

Connected switching socket outlet with pin earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Wireless smart hub for Niko Home Control, UK version

The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software. This version of the wireless smart hub comes with a UK power plug.

Digital black, connected customisable control screen, 230 V

Digital black is a customisable control screen for Niko Home Control with an extremely user-friendly interface with clear symbols. The screen is automatically activated when your hand comes near. When there is no Niko Home Control installation available, the built-in switching contact can be controlled via the touchscreen or an N.O. push-button extension (170-X00XX). When the connection to a Niko Home Control installation has been made, it becomes possible to switch or dim your lights, set scenes, set ventilation modes and adjust blinds and sunblinds to the desired position in one operation. In short, all possible Niko Home Control control types are available. Do you have an active connection with one of our heating partners? Then you can easily set the temperature with the Digital black. With the Niko Home app you can choose which controls are displayed or where they are displayed on the screen, but also the way you navigate through your control screens. You can download this app for free in the App store or the Google Play store. Digital black can be easily mounted in any standard flush-mounting box using the familiar claw or screw fixing and is powered on 230 Vac (L- + N-wire required). This 230 Vac variant is equipped with a switching contact 10 A (resistive), meaning that it can easily be replaced with a conventional single-pole switch. In combination with the wireless smart hub for Niko Home Control (552-00001) and additional controls from the Niko Home Control range for traditional wiring, you can easily add automation to your conventional installation. The screen communicates via your Wi-Fi network with the rest of your Niko Home Control system. You need an active internet connection to activate Digital black. This internet connection ensures that your Digital black and Niko Home Control installation are always up-to-date and have the most recent functionalities.

Wireless battery-powered switch, 2-fold, Zigbee®

This twofold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72002) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the twofold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72012). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Connected switching socket outlet with side earthing and shutters, Zigbee®

The connected switching socket outlet communicates wirelessly with the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation with the wireless bridge for Niko Home Control (550-00640). In combination with the smart hub or wireless bridge, it can be connected to a wireless switch without additional wiring. Moreover, the plugged-in device can be linked to handy routines such as an all-off/all-on function or calendar functions and controlled remotely via the Niko Home app. In addition, its built-in consumption measurement helps you to save energy as you can consult the plugged-in device’s energy data via the Niko Home app. Use the connected switching socket outlet within the routines ‘peak mode’ and ‘solar mode’ to optimise your energy production and consumption. Note that it can also be used stand-alone as a conventional socket outlet. It is fitted with a standard built-in overtemperature and overcurrent protection to ensure complete safety.

Connected single switch, 10 A, Zigbee®

The connected single Zigbee® switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software.

Connected double switch, 2 x 10 A (max. 16 A in total), Zigbee®

The connected double Zigbee® switch has two switching contacts to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected double switch to replace a conventional switch. It is equipped with two extension terminals so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected double switch can switch its own contacts. Once the wireless smart hub for Niko Home Control (552-00001) has been added, it is possible to configure additional functionalities with the Niko Home Control programming software. That way, it is possible to connect these in a scene or all-off function and much more. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). It is possible to disconnect the control from its built-in contacts. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software.

Connected dimmer, 3-200 W, 2-wire, Zigbee®

The connected Zigbee® dimmer contains a dimmer contact to control the lighting. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected dimmer to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected dimmer can switch its own contact. With the addition of the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). It is possible to disconnect the control from its built-in dimming contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software.

Connected motor control, 3 A, Zigbee®

The connected Zigbee® motor control contains a switching contact to control a 230 V motor. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected motor control to replace a conventional motor control. The connected motor control can switch its own contacts. With the addition of the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a scene or all-off function. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Connected single switch, 10 A, Easywave #

The connected single switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected single switch to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected single switch can switch its own contact. Once connected to the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, you can add the switch to a scene or all-off function. It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software. This device is not compatible with the wireless bridge (550-00640).

Connected double switch, 2 x 10 A (total max. 16 A), Easywave #

The connected double switch has a switching contact to switch lighting. It contains a transmitter and receiver that can communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected double switch to replace a conventional switch. It is equipped with two extension terminals so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected double switch can switch its own contact. Once the wireless smart hub for Niko Home Control (552-00001) has been added, it is possible to configure additional functionalities with the Niko Home Control programming software. That way, it is possible to connect these in a scene or all-off function and much more. It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software. This device is not compatible with the wireless bridge (550-00640).

Connected dimmer, 3-200 W, 2-wire, Easywave #

The connected dimmer contains a dimmer contact to control the lighting. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected dimmer to replace a conventional switch. It is equipped with an extension terminal so that, in combination with a conventional push button, it can easily replace multiway or intermediate switching. The connected dimmer can switch its own contact. With the addition of the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a scene or all-off function. It is possible to disconnect the control from its built-in contact. That way, you have complete flexibility to configure the switching contact and the controls separately via the programming software. This device is not compatible with the wireless bridge (550-00640).

Connected motor control, 3 A, Easywave #

The connected motor control contains a switching contact to control a 230 V motor. It contains a transmitter and receiver that communicate wirelessly with the wireless smart hub for Niko Home Control (552-00001). You can use the connected motor control to replace a conventional motor control. The connected motor control can switch its own contacts. With the addition of the wireless smart hub for Niko Home Control (552-00001), it is possible to configure additional functionalities with the Niko Home Control programming software. For example, it becomes possible to add it to a scene or all-off function. This device is not compatible with the wireless bridge (550-00640).

Motion detector, Zigbee®, 5 m, 110°, wireless, for surface mounting

The wireless motion detector can be used to control other switching contacts. For example, when motion is detected, you can control the contact of another connectable switch, dimmer or motor control. Since the motion detector is powered by a button battery and is supplied with a self-adhesive mounting plate, it can be easily attached anywhere. This makes it possible to configure additional functionalities with the Niko Home Control programming software. This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). This motion detector can be used in combination with the wireless smart hub for Niko Home Control (552-00001).

Smart plug with pin earthing, Zigbee®

Use the smart plug to switch any plugged-in device on and off and to measure its energy consumption. Once the smart plug has been inserted into a wall-mounted socket outlet, you can switch the plugged-in device on and off locally using the button on the plug. To benefit from all the smart functionalities Niko Home Control has to offer such as smartphone control inside and outside the home (e.g. in an all-off function or solar mode) and to monitor your energy consumption, you can wirelessly connect the smart plug to the separately available wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). The easy way of connecting the smart plug makes it possible to move the plug around in your house to discover the energy consumption of multiple appliances with just one smart plug.

Smart plug with side earthing, Zigbee®

Use the smart plug to switch any plugged-in device on and off and to measure its energy consumption. Once the smart plug has been inserted into a wall-mounted socket outlet, you can switch the plugged-in device on and off locally using the button on the plug. To benefit from all the smart functionalities Niko Home Control has to offer such as smartphone control inside and outside the home (e.g. in an all-off function or solar mode) and to monitor your energy consumption, you can wirelessly connect the smart plug to the separately available wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640). The easy way of connecting the smart plug makes it possible to move the plug around in your house to discover the energy consumption of multiple appliances with just one smart plug.

Wireless measuring module (3 channels)

This module is used to measure your overall electricity consumption, solar production and energy consumption of individual devices. It communicates wirelessly with your Niko Home Control installation. You can use the measured values to: • monitor electricity consumption, production and self-consumption, by using the Niko Home app • receive notifications in case of abnormal energy consumption, by using smart energy alerts in Niko Home Control • increase your self-consumption, by using the Niko Home Control solar mode to automatically activate appliances in case of excess solar energy • control your peak consumption, by using the Niko Home Control peak mode

Wireless battery-powered switch, 1-fold, Zigbee®

This onefold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72001) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the onefold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72011). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless battery-powered switch, 4-fold, Zigbee®

This fourfold wireless battery-powered Zigbee® switch allows you to remotely control wireless Zigbee® devices. It can either be used in your Niko Home Control installation or connected to a third-party Zigbee® network as a standard dimmer switch via Find&Bind pairing. Moreover, the switch can be paired with up to eight Zigbee® receivers for stand-alone use via Touchlink. It is battery-powered with a lifetime of at least five years, based on twenty short-press actuations a day. The wireless Zigbee® switch is mounted on a plastic base. The set (base + switch 552-72004) can be screwed on a wall (screws excluded) or glued to a flat surface with double-sided adhesive tape (included). If you want to install the fourfold wireless battery-powered Zigbee® on a flush-mounting box, order the variant without plastic baseplate (552-72014). Combine it with a metal baseplate (552-720X0) instead. The wireless battery-powered switch can be connected wirelessly to the wireless smart hub for Niko Home Control (552-00001). This device can also be used in a bus wiring installation in combination with the wireless bridge for Niko Home Control (550-00640).

Wireless switch with 2 control buttons

This wireless switch with two control buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper: on, lower: off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface for Niko Home Control (410-00099) or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001). This device is not compatible with the wireless bridge (550-00640).

Wireless switch with 4 control buttons

This wireless switch with four control buttons can be used by a smart switch or a wireless receiver. It can be used as a two dual-button controls (upper: on, lower: off) or as four one-button controls (on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface for Niko Home Control (410-00099) or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001). This device is not compatible with the wireless bridge (550-00640).

Mini hand-held RF transmitter with 1 channel and 1 action button

This hand-held transmitter has one control button and can be used in combination with every Niko receiver. One function can be assigned to the control button. Visual check of the control via a LED. For use in a residential environment. Battery supplied. In combination with the USB RF interface for Niko Home Control(410-00099), the hand-held transmitter can also be used in Niko Home Control installations.

Wireless mini hand-held transmitter with 1 channel and 4 action buttons

This hand-held transmitter has four independent action buttons and can be used in combination with all Niko receivers. A different function can be assigned to every action button. Visual feedback of the control via an LED. The battery is supplied with the transmitter. In combination with the USB RF interface for Niko Home Control (410-00099), the hand-held transmitter can also be used in Niko Home Control installations.

This website makes use of the following types of cookies: