Wireless switch with 2 control buttons
This wireless switch with two control buttons can be used by a wireless receiver from the Easywave range. It can be used as one dual-button control (upper: on, lower: off), or as two one-button controls (toggle on/off or pulse). The switch can also be used in the Niko Home Control installation for bus wiring in combination with the USB RF interface for Niko Home Control (410-00099) or in the Niko Home Control installation for traditional wiring in combination with the wireless smart hub (552-00001). This device is not compatible with the wireless bridge (550-00640).
Product details
Base for wireless switch with 2 control buttons
With this wireless switch, you control a maximum of 2 circuits, independent of one another, but dependent on the receiver settings. The switch is used for 1-button and 2-button functions.
Specification description
Base for wireless switch with 2 control buttons.
- Not compatible with the wireless bridge, compatible with the wireless smart hub
- Communication protocol: Easywave
- Maximum radio frequency power: -1.3 dBm
- Operating frequency: 0.8683 GHz
- Fixing method
screw fixing or gluing
- Dimensions (HxWxD): 71 x 103 mm
- Weight: 20 g
- Marking: CE
Single key for wireless switch or push button with 2 control buttons, cream
Single key for wireless switch or bus push button with 2 control buttons. Finishing colour: cream.
Single key with 'I' and '0' symbols for wireless switch or push button with two control buttons, cream
Single key with 'I' and '0' symbols for a wireless switch or bus push button with two control buttons. Finishing colour: cream.
Single key with 'up' and 'down' arrows for wireless switch or push button with 2 control buttons, cream
A single key with the symbol 'up' and 'down' for a wireless switch or bus push button with 2 control buttons. Finishing colour: cream.
Related products
USB RF interface for Niko Home Control
The USB RF interface makes it possible to use Niko wireless Easywave controls (with the exception of the remote control 05-312) in the Niko Home Control installation for bus cabling. This allows wireless controls to be installed: • on surfaces unsuited to cabling (e.g. glass or concrete partitions) • for the renovation of heritage-listed buildings • for expansions of existing installations where drilling or channelling work is not permitted • in office areas with movable partition walls • when complex cabling is to be avoided. The interface is shaped like a USB stick and can be connected to the connected controller (550-0000X) in the electrical cabinet, using the provided extension cable (3 m). The end of the extension cable is fitted with an assembly ring allowing the antennae to be attached to the outside of the electrical cabinet for optimal reception.
Wireless smart hub for Niko Home Control
The wireless smart hub for Niko Home Control is the brain of the installation. It allows you to connect all connected devices in your installation to the system. Once you have added them, you can easily control them with your smartphone. With the programming software, you can also add extensive functionalities such as scenes, all-off actions or presence simulation. The smart hub always needs to be used in combination with the Niko Home Control programming software or the Niko Home app.
Connected controller for Niko Home Control II
The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.
