Motion detector, Niko Home Control, 16 m, 180°, IP54, with orientable lens, for surface mounting
This motion detector is suitable for use on driveways, on outdoor patios, in garden areas or in garages. The detector is equipped with an integrated light sensor. The sensor can be rotated horizontally within a 25° angle to modify the direction of detection. If you do not want the motion detector to detect any motion within a certain section of the detection area, you cover the sensor lens using the cover cap supplied. Niko Home Control supplies power to the motion detector. No additional power supply is required.
Product details
Motion detector, Niko Home Control, 16 m, 180°, IP54, with orientable lens, for surface mounting, white
This motion detector is suitable for outdoor use, for example, along the driveway, on the terrace or in the garden. It is also equipped with a built-in light sensor. You aim the motion detector wherever you wish and partition the detection area using a cover mask. The Niko Home Control system supplies power to the device.
Finishing colour: white
Compatible secondary detectors: 550-20200
Specification description
Motion detector, Niko Home Control, 16 m, 180°, IP54, with orientable lens, for surface mounting, white.
- Detector technology: PIR
- Input voltage: 26 Vdc (SELV, safety extra-low voltage)
- Detector output: 26 V
- Light intensity range: 5 lux – ∞
- Switch-off delay: 8 s – 30 min
- Detection angle: 180°
- Detection range (PIR): 16 m from a height of 3 m
- Ambient temperature: -20 – +45 °C
- Mounting method: surface mounting
- Mounting height: 2 – 3 m
- Usage: for outdoor use
- Dimensions (HxWxD): 70 x 90 x 130 mm
- Dimensions visible (HxWxD): 70 x 90 x 130 mm
- Weight: 164 g
- Protection degree: IP54
- Marking: CE
Accessories
Mounting brace for outdoor motion detector, white
You can fasten an outdoor motion detector to a ceiling with this mounting bracket. Finishing colour: white.
Compatible articles: 350-20050, 550-20200
Specification description
Mounting brace for outdoor motion detector, white
Niko mounting bracket for ceiling mounting of Niko outdoor motion detector 350-20050. Colour: white.
- Dimensions (HxWxD): 46.7 x 53.5 mm
- Weight: 35 g
Related products
Connected controller for Niko Home Control II
The connected controller is the central module of every Niko Home Control installation for bus wiring. This module contains firmware that can only be programmed with the Niko Home Control programming software 2.1.1 or higher. It covers all basic functions on which a Niko Home Control installation is built. The basic functions include: • The intelligence directing the logic to the installation. Through the configuration software, the logic is saved locally on the controller. • The power supply module providing an input voltage of 26 V to the bus, the cabinet modules and the controls. Depending on the size of the installation, separate power supply modules can be added. • The connection to Niko Home Control IP devices such as touchscreens and external video units. A built-in router allows the user to connect up to 3 devices directly to the controller. With an extra switch, this number can be increased. • The connection to the internet. This enables the user to control the installation both indoors and outdoors (via mobile networks such as 3G, 4G, GPRS or Wi-Fi hotspot) using mobile devices (smartphones and tablets with iOS or Android). The module has a TEST button to verify the proper functioning and status of all other modules. Each installation must consist of one connected controller. After registration, your installation is connected, enabling control through the app via your smartphone and tablet, and you can enjoy the Niko services for upgrade or diagnosis of the installation.
Power supply
The power supply, in combination with the connected controller, provides an extra input voltage of 26 V to the bus, modules and controls. An extra power supply is only necessary in installations for which the power of the built-in power supply of the connected controller is insufficient. Up to 2 extra power supplies can be connected to installations with a connected controller. The MASTER button is not used, as the built-in power supply of the connected controller is always the master. For more information on the required number of power supplies, you can consult the installation manual.
Rail coupler
This module is always mounted first on the left at the start of a new row of DIN rail modules that doesn't contain a connected controller or power supply. Interconnect the power supply and bus through the contacts at the top and bottom.
