Niko dimmer switch, Bluetooth®

With this wireless and battery-free dimmer switch in Niko design, you can remotely operate Bluetooth® low energy 2,4 GHz wireless receivers that are located in the same room. Examples are Niko presence and motion detectors with a Bluetooth® interface (P48, P42 and M48 series) or smart lighting with integrated Bluetooth® technology from Casambi® or Xicato®. For best performance, follow the installation and radio planning guidelines. Configure each dimmer switch push button with the respective smart lighting smartphone app or software app (e.g. Niko detector tool app, Casambi app, Xicato® Control Software, SylSmart Standalone app, .. ). Up to four buttons can be configured. No wall breaking or cable installation is needed. The dimmer switch can be mounted in a European flush-mounting box, screwed on a wall (screws not included) or glued to a flat surface with double-sided adhesive strips (included). The central plate and faceplate must be ordered separately. The dimmer switch combines with any Niko Pure, Niko Intense and Niko Original faceplate in the colour of your choice.

Niko dimmer switch, Bluetooth®.

• Dimensions (HxWxD): 83 x 83 x 15 mm
• Power supply: integrated kinetic energy Harvester
• RF protocol: Bluetooth® Low Energy (BLE)
• Configuration: NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 and 3)
• Modulation: Gaussian frequency-shift keying (GFSK) / 1 Mbps
• Operating frequency: 2,4 GHZ (2402 to 2480 MHZ)
• Data rate: 1 Mbps
• Mounting height: 110 cm
• Temperature (storage / operating): -25°C - +65 °C
• Maximum range (indoor): up to 10 m. Depending on the smart lighting, the receiver can also act as a relay and augment the range
• Maximum RF power: 0,4 dBm
• Antenna: Integrated antenna
• Protection degree: IP20
• Marking: CE
• Number of control buttons: 4 control buttons
• Communication protocol: Bluetooth® Low Energy
• Maximum radio frequency power: 0.4 dBm
• Operating frequency: 2.4 GHz
• Fixing method

screw fixing or gluing

• Centre-to-centre distance
  • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
  • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
  • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
  • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
  • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
• Dimensions (HxWxD): 83 x 83 x 15 mm
• Weight: 25 g
• Marking: CE