! This version of Internet Explorer is not supported anymore !

We recommend to visit our website with another browser (Microsoft Edge, Chrome, Firefox, ...)

N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals

Reference code
170-03005
Technical datasheets
Inspection certificates
Certificaten CE-Marking

Description

Mechanism for a N.O. or N.C. push button with 4 connection terminals, with claw fixing. A finishing set and faceplate in the colour of your choice must be ordered separately.

Specification description

N.O. or N.C. push button with 4 connection terminals, 10 A/250 Vac, plug-in terminals.

  • Function: – push button
    • block-shaped silver contacts (cadmium-free) in the form of a cross
  • Number of control buttons: 1 control button
  • Protection degree: IP41 for the combination of a mechanism, central plate and faceplate
  • Impact resistance: The combination of a mechanism, a central plate and a faceplate has an impact-resistance of IK06
  • Material base
    • ureumformaldehyde (UF) with high heat resistance
    • white RAL9010 (approximately)
  • Flush-mounting frame
    • 1 mm-thick metal
    • galvanized on all sides after cutting, even on the cut edges
    • with 4 grooves with screw hole of 7 mm
    • with 4 screw holes (indicated by a screw symbol) with a diameter of 3 mm for mounting on panels
  • Fixing method
    • simple mounting in a flush-mounting box with grip surfaces
    • with claws that rotate open using screws with a combination screwhead (Pz1 or slot 1 x 5 mm), for mounting in a flush-mounting box with grip surfaces
    • engagement depth of claws: 31 mm
    • claws can be pushed back into their original position
    • claws can be easily pushed out using a screwdriver
  • Centre-to-centre distance
    • Simple and quick assembly of one or more mechanisms by the indication (chalk line, laser, etc.) of the centre of the flush-mounting frame
    • vertical coupling centre-to-centre distance 60 mm by sliding several bases into each other, they lock themselves automatically
    • vertical coupling centre-to-centre distance 71 mm using pre-formed lips at the bottom, by folding the lips downwards over a length of 1 mm, the bases support each other and the centre-to-centre distance is guaranteed.
    • horizontal connection of multiple bases is quick and perfect thanks to the folded-up dovetails on the left and right sides
    • extra robustness due to the folded-up edges on the outside of the base and the continuation into the inside of the base
  • End border: 4 rectangular openings (7 x 2.5 mm) which, if the flush-mounting box protrudes from the plasterwork, can compensate for a margin of between 1 and 1.2 mm, so that the faceplate can still butt up perfectly against the wall
  • Extra terminal
    • provided with a fourth terminal allowing the connection of a lighting unit
  • Wire connection
    • contact buses fitted with plug-in terminals for clamping the wires
  • Wire capacity
    • all connection terminals at the top side of the base
    • up to 2 x 2.5 mm² wire per terminal
  • Stripping length
    • 12 mm stripping length
    • indelibly indicated at the rear side: stripping length and wiring diagram
    • indelibly indicated at the front side: terminals and switch symbol
  • Lighting element
    • the base is provided with 2 rectangular recesses for a lighting unit
    • left recess (front view): a lighting unit with wires can be clicked in
  • Ambient temperature: -5 – +40 °C
  • Dimensions (HxWxD): 71 x 73 mm
  • Certification marks: CEBEC, NF
  • Marking: CE

Select a product below to view related articles, variants or accessories:

Favorites ( 0 )